How To Login to a ReadyNet Router And Access?

The web interface of your ReadyNet router is its control panel. This is the place where all the settings are stored and altered. To make these alterations, you are required to log in to your ReadyNet router. Below are the instructions that you need to follow in order to connect to the interface of your ReadyNet router. 

1) Please Ensure that You are Connected to the ReadyNet Router

If you wish to reach the setup pages of your ReadyNet router, then you are required to connect to the network. You can either connect to the network using an ethernet cable or through a wireless network. 

2) Launch Your Web Browser and then Go to the IP Address 192.168.11.1

Open your web browser and then go to the address bar of your browser. There, you need to type the IP address of your router. One of the most common IP addresses for ReadyNet router is 192.168.11.1.

In case this IP address is not working, then you can search for the default IP address of your model. 

3) Enter the Username and Password of your ReadyNet Router

Go to the username and password field and then enter your present username and password. In case you are not sure what the username and password are, then you can search for the default ReadyNet credentials to get to know the defaults and how you can reset them.

You can also see these credentials printed on the back of your router. 

How can I Configure ReadyNet Router?

After you have logged into your ReadyNet admin interface, you must change the available settings. Please be careful when you configure your router. This way, your network won't break. 

If you make some changes by mistake that break your home network, then you must perform a 30-30-30 hard reset. This is generally the last resort and in order to have the access to the interface you need to log in and revert the settings. 

This is how you log into your ReadyNet router.