How to Fix Belkin Range Extender Blinking Yellow Light?
By Belkin Range Extender
Date : May 8, 2019
Comments : 0
Category : Belkin Support
Belkin range extender blinking yellow or blinking amber light has now become one of the common problems faced by people around the world. Every Belkin range extender user complains about the blinking light problems yet they are unable to find the appropriate solution to it.
For cases when they understand the cause, they troubleshoot and fix the problem easily. But most of the times, they fail in fixing Belkin Range Extender Blinking Yellow Light.
This blog post provides you the easiest solution to fix the light problems of Belkin range extender. Just follow the given set of instructions in this guide and you can solve the complete problem by yourself.
Reasons Behind Belkin Range Extender Blinking Yellow Light:
Initially, the user should have an understanding of the reasons causing this yellow or orange light of Belkin extender. Let us look a few of them listed below.
- Your Belkin range extender might be requiring a software or firmware update.
- The possibility that your extender is unable to communicate with your existing router device.
- Your modem(I.S.P) is having trouble while providing the Internet to your router.
There can be other possible reasons also for causing blinking orange light of Belkin Extender like one is losing Internet Connectivity. But, once you understand the problem you can fix the issue by yourself.
Basic Steps to Resolve Belkin Extender Blinking Light Problem:
In order to fix an issue, consider diagnosing the Belkin extender and router following some normal steps.
- Restart the modem or router device and wait for two minutes till it initializes.
- Ensure that the Internet connection light of modem or router is blinking.
- Now unplug the Belkin range extender hardware and wait for next 20 seconds. Once done, plug it back into the power socket or outlet.
- Use the Mod Internet with your Belkin range extender.
How to Login into Your Belkin Range Extender?
In order to connect the extender with your computer system, either wired or wirelessly, follow the given steps:
Step 1 : Open any installed browser on your system or device.
Step 2 : Type and enter the default login URL as http://belkin.range. This will open up the Range extender Web console which is easily accessible to the user.
Step 3 : Here, you will be asked to enter the login credentials to access the admin console of Belkin extender. Enter the username as Admin and password as Password.
Step 4 : Continue and save the configured settings.
If in case, you are unable to login and access the Belkin extender web dashboard, it is suggested to hard reset your Belkin range extender device.
How to Reset Belkin Range Extender?
Press and hold the Power Key for at least 30 seconds till all the lights on your Belkin router extender start flashing or blinking.
Note: You have to wait for a while after turning on your extender device. This is required for the case if the extender blinks orange light then yes your problem is resolved.
Try restarting the Belkin extender so that the extender settings are refreshed and saved. Once you have hard reset your Belkin extender, set it up again from scratch and configure all of its settings as per your needs.
If the Belkin Range Extender is Still not Working Even after Reset and Setup, Consider Following These Three Steps:
Step 1 : Reset, restart your main router device and router range extender again.
Step 2 : Follow up with your Internet Service Provider and ask them if you are not getting the Internet connection from their side.
Step 3 : Set up your router first after resetting both the devices and then install the Belkin range extender.
Note: Always remember to place your range extender in an area covering strong network signals. In fact, keep the Belkin range extender near to the router device. Then make an observation whether you get a blue light or orange light on it.
Whenever you get a blue or green light on your range extender, this indicates a signal range problem which can be resolved by keeping the range extender within the wifi range.
Why Your Router is Unable to Connect to the Belkin Range Extender?
Sometimes you might encounter a problem during installation of the range extender. The Belkin Setup is unable to communicate with your range extender due to technical issues. So, ensure that it is powered ON. In case you are still unable to connect, reset your range extender by pressing and holding it for 10 seconds.
Resetting process involves restoring the range extender settings to factory default settings. The reset button is usually found at the bottom of the device.
Why the Belkin Range Extender is Unable to Connect to the WiFi?
Several problems can possibly cause the wireless connection problems with your range extender and router devices such as physical obstructions or any wireless interference. To indicate the status of a network connectivity problem, indicator lights are given on the front panel of the device.
Hope you find these instructions useful to resolve the yellow blinking light problem for your Belkin extender router.